Airport Information
Wright-Patterson Air Force Base (KFFO) is an active U.S. Air Force installation in the Dayton, Ohio area with FAA-published terminal procedures for FFO/KFFO and runway operations. Drone operations nearby may be affected by controlled airspace, Dayton-area airport traffic, security-sensitive activity, NOTAMs, or TFRs. See the FAA terminal procedures listing for FFO/KFFO and the official Wright-Patterson AFB site.
This airport is associated with Class D / Dayton airspace vicinity airspace. Verify the airspace at the actual flight location and altitude.
Prior FAA authorization is required for drone flights in Class B, C, D, or the airport-designated surface area of Class E under 14 CFR 107.41 or the applicable recreational framework.
Radio Frequencies
These frequencies are situational-awareness references. Do not request routine small-UAS airspace access directly from ATC by radio or telephone. Follow any communication requirements in your issued authorization; see FAA AIM 11-8-2.
For current communications data, runway/sector assignments and operating hours, search KFFO in the FAA Chart Supplement and check current NOTAMs. Any reference frequencies shown below were checked against the October 1, 2026 FAA data cycle and are not a live operational source. Unsupported values have been omitted.
Ground
121.8 MHz
Taxiway and ground operations. Primary
Airport Airspace Map
Interactive FAA ArcGIS map centered on KFFO with LAANC grid overlay and controlled airspace details.
Safety & Compliance
Before flying near KFFO, pilots should:
- Obtain FAA authorization where controlled airspace rules apply under 14 CFR 107.41.
- Use UASFM/LAANC planning for the exact launch point and verify current NOTAMs before flight.
- Confirm installation rules and any required permission for access, launch, landing, or ground operations. Separately check FAA national-security and other airspace restrictions; installation permission alone is not flight authorization.
Airspace Restrictions
KFFO airspace planning should start with B4UFLY, LAANC availability, airport proximity, and any Temporary Flight Restrictions that may affect launch or recovery.
Check the entire flight area and altitude, not only the launch point. UAS Facility Maps do not grant authorization. Separately check national-security UAS restrictions and prohibited, restricted, and temporary restricted airspace. Military activity or a nearby airport name alone does not establish a no-fly boundary.
FAA airspace approval does not grant access to airport, military, or other property for launching, landing, or ground operations. Confirm applicable property rules and any required permission with the land manager. An installation's permission does not by itself override an FAA restriction; follow the approval conditions in the applicable restriction.
- Controlled airspace: KFFO and nearby Dayton-area controlled airspace can affect UAS authorization requirements.
- Nearby airports: Review Dayton International, Springfield-Beckley, and local hospital heliport activity where relevant.
- TFR/security sensitivity: Check FAA TFRs and installation notices before launch.
Federal Regulations (14 CFR Part 107)
- 107.19 - Remote pilot in command responsibilities
- 107.21 - In-flight emergency procedures
- 107.25 - No operation from a moving aircraft; moving land/water vehicles require a sparsely populated area and cannot transport another person's property for compensation or hire
- 107.31 - Visual line of sight
- 107.37 - Yield right-of-way and avoid other aircraft
- 107.49 - Preflight familiarization, inspection, and actions
- 107.51 - Altitude and structure exception, groundspeed, visibility, and cloud clearance
How to Get Authorization
- LAANC: Part 107 pilots and recreational flyers can request eligible authorizations through an FAA-approved LAANC service supplier where available
- FAA DroneZone: Use FAA DroneZone for applicable airspace requests not served by LAANC; see the FAA authorization guidance
- Authorization conditions: Complete any coordination required by your issued authorization. Direct radio or telephone requests to the tower are not the routine airspace-access process (FAA AIM 11-8-2).
- B4UFLY: Use an FAA-approved B4UFLY service for situational awareness. Also check current FAA NOTAMs and TFRs; an app check or this page is not a complete preflight briefing or flight authorization
Nearby Airports
Other airports and controlled airspace facilities in the area:
- KDAY — Dayton International Airport (13 miles)
Connected location pages
Nearby Flight Planning Pages
Related city and state pages
- Ohio drone laws - State-specific regulations, park rules, and local law context
- Dayton, Ohio - Local city rules, nearby airports, and preflight planning details
- Browse all state drone law pages
- Browse all city drone law pages