Airport drone regulations

KTCM Drone Restrictions Near McChord Field

Review drone airspace restrictions, LAANC planning, radio frequencies, weather, and compliance considerations for operations near McChord Field.

Last updated: 2026-04-24 Informational use only
Informational use only. This page is not legal advice, aviation advice, or an official FAA or local-government publication. Rules, restrictions, authorizations, and local requirements can change. Verify current requirements with the FAA, B4UFLY, LAANC/UAS service suppliers, airport operators, property owners, and local authorities before flight.

Airport Information

Airport Code KTCM
Airport Name McChord Field
Location Tacoma, Washington
Airspace Class Class D / Seattle-Tacoma Class B vicinity
Coordinates 47.13767777, -122.476475

McChord Field (KTCM) is the Air Force airfield component of Joint Base Lewis-McChord near Tacoma, Washington. FAA terminal procedure data identifies McChord Field with TCM/KTCM, and UAS planning should account for Class D airspace, nearby Seattle-Tacoma Class B airspace, and military transport operations. See the FAA terminal procedures listing for TCM/KTCM and the official JBLM site.

This airport is associated with Class D / Seattle-Tacoma Class B vicinity airspace. Verify the airspace at the actual flight location and altitude.

Prior FAA authorization is required for drone flights in Class B, C, D, or the airport-designated surface area of Class E under 14 CFR 107.41 or the applicable recreational framework.

Radio Frequencies

These frequencies are situational-awareness references. Do not request routine small-UAS airspace access directly from ATC by radio or telephone. Follow any communication requirements in your issued authorization; see FAA AIM 11-8-2.

For current communications data, runway/sector assignments and operating hours, search KTCM in the FAA Chart Supplement and check current NOTAMs. Any reference frequencies shown below were checked against the October 1, 2026 FAA data cycle and are not a live operational source. Unsupported values have been omitted.

Airport Airspace Map

Interactive FAA ArcGIS map centered on KTCM with LAANC grid overlay and controlled airspace details.

Selected point guidance

Authorization Decision

Search for your specific launch location above to see airspace regulations.

Selected Location
No launch location selected yet.
Airspace
Point-specific FAA airspace guidance will appear after you search an address.
FAA Grid Guidance
Search for a specific launch location to load FAA UAS Facility Map guidance.
Authorization Types Shown in LAANC
Authorization types will appear after a selected point is resolved.
TFR Status
The page's FAA TFR data will be combined with the selected point after address search.
Next Step
Search for your specific launch location above to see airspace regulations.

Safety & Compliance

Before flying near KTCM, pilots should:

  • Check Class D and nearby Class B authorization requirements under 14 CFR 107.41.
  • Use UASFM/LAANC planning for the exact launch point and altitude.
  • Review FAA TFRs and JBLM installation restrictions before flight.

Airspace Restrictions

KTCM airspace planning should start with B4UFLY, LAANC availability, airport proximity, and any Temporary Flight Restrictions that may affect launch or recovery.

Check the entire flight area and altitude, not only the launch point. UAS Facility Maps do not grant authorization. Separately check national-security UAS restrictions and prohibited, restricted, and temporary restricted airspace. Military activity or a nearby airport name alone does not establish a no-fly boundary.

FAA airspace approval does not grant access to airport, military, or other property for launching, landing, or ground operations. Confirm applicable property rules and any required permission with the land manager. An installation's permission does not by itself override an FAA restriction; follow the approval conditions in the applicable restriction.

  • Controlled airspace: KTCM airspace may require FAA authorization before launch.
  • Nearby airspace: Seattle-Tacoma Class B, Tacoma Narrows, and Gray Army Airfield can affect nearby UAS planning.
  • Security: Confirm installation rules and any required permission for access, launch, landing, or ground operations. Separately check FAA national-security and other airspace restrictions; installation permission alone is not flight authorization.

Federal Regulations (14 CFR Part 107)

  • 107.19 - Remote pilot in command responsibilities
  • 107.21 - In-flight emergency procedures
  • 107.25 - No operation from a moving aircraft; moving land/water vehicles require a sparsely populated area and cannot transport another person's property for compensation or hire
  • 107.31 - Visual line of sight
  • 107.37 - Yield right-of-way and avoid other aircraft
  • 107.49 - Preflight familiarization, inspection, and actions
  • 107.51 - Altitude and structure exception, groundspeed, visibility, and cloud clearance

How to Get Authorization

  • LAANC: Part 107 pilots and recreational flyers can request eligible authorizations through an FAA-approved LAANC service supplier where available
  • FAA DroneZone: Use FAA DroneZone for applicable airspace requests not served by LAANC; see the FAA authorization guidance
  • Authorization conditions: Complete any coordination required by your issued authorization. Direct radio or telephone requests to the tower are not the routine airspace-access process (FAA AIM 11-8-2).
  • B4UFLY: Use an FAA-approved B4UFLY service for situational awareness. Also check current FAA NOTAMs and TFRs; an app check or this page is not a complete preflight briefing or flight authorization

Nearby Airports

Other airports and controlled airspace facilities in the area:

  • KSEA — Seattle-Tacoma International Airport (18 miles)

Connected location pages

Nearby Flight Planning Pages

Related city and state pages

Important Disclaimer

This content is provided for general informational purposes only and may be incomplete, outdated, or inapplicable to your specific situation. It is not legal advice, aviation advice, safety advice, emergency guidance, or an official interpretation of any law, regulation, waiver, or authorization requirement.

Always confirm current requirements directly with the FAA, B4UFLY, UAS Facility Maps, LAANC/UAS service suppliers, airport operators, venue operators, landowners, and applicable local, state, tribal, or federal authorities before flight.